ID # 32750263

Exmark Lazer Z X-Series LZX993EBV606X1

Call for Price
Overview

With options to meet the needs of the most demanding landscape maintenance professionals, our top-rated Exmark Lazer Z X-Series zero-turn mowers represent the state-of-the-art in commercial mowers. Cutting deck options include our massive 96-inch UltraCut Flex Wing cutting deck and select models equipped with our exclusive cut quality enhancing Adapt Technology. Choose from rugged commercial-grade engines, including high-efficiency Electronic Fuel Injection (EFI) options equipped with our exclusive EGov and RED Technology, which can boost fuel efficiency by up to 41%. Lazer Z X-Series zero-turn mower models are available with UltraCut Series 6 decks in 52-, 60-, and 72-inch cutting widths, with or without Adapt Technology, or the 96-inch UltraCut Flex-Wing rear discharge cutting deck.

Regardless of the combination you choose for your Exmark Lazer Z zero-turn mower, you’ll ride in unmatched comfort thanks to our full-suspension seating system and smooth, easy-to-use controls that offer precision maneuverability. And from a long-term value standpoint, nothing beats the Exmark Lazer Z X-Series mower. It's the perfect combination of power, productivity, and durability. That's why it's our top-of-the-line gasoline-powered mower and should be at the top of your list.

Note: Lazer Z X-Series with Adapt is a new product and will not be available in dealerships until Spring 2023.

Specifications
Model
Lazer Z X-Series
Year
2023
Sale Type
New
Manufacturer
Exmark
Mower Deck Widths
52", 60", 72", 96"
features

Exmark Lazer Z X Series LZX993EBV606X1 UltraCut Series 6 Deck

This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)

Exmark Lazer Z X Series LZX993EBV606X1 Oil Guard System

The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.

Exmark Lazer Z X Series LZX993EBV606X1 Patented RED Technology

Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

Exmark Lazer Z X Series LZX993EBV606X1 A New Level of Comfort

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

Exmark Lazer Z X Series LZX993EBV606X1 Productivity

Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

Exmark Lazer Z X Series LZX993EBV606X1 Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

equipment
UPC
193308219950
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
AGM, 12-Volt battery with 20-amp alternator.
Drive Tires
24 x 12.0-12, 4-ply Turf Master®
Parking Brake
Lever-actuated disc brake.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard Features
Engine hour meter and cup holder
Front Caster Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
power components
ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Casters
.50" thick caster yoke arms.
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel Type
Gas EFI
Air Filter
Heavy-duty canister air filtration system
Engine Brand
Briggs
Engine Model
M61E8
Engine Speed
3,650 RPM
Engine Series
Command Pro™ EFI
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Carb Compliant
Fuel Indicator
Yes - electronic Sender
PTO Engagement
MagStop Electromagnetic 250-ft-lb clutch with spot brake
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release
Allows unit movement without engine running.
Engine Displacement
993
decks
Blades
3 Blades at 20.50" Length
Deck Style
Floating Deck
Blade Tip Speed
Approximately 18,500 fpm.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Width / Cutting Deck
60"
Deck Style Description
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
dimensions
Width
72.8 in. (184.9 cm)
Height
70.5 in. (179.1 cm)
Length
83.1 in. (211.1 cm)
Curb Weight
1372
literature
Name Link
Brochure Download
Documents
My Cart - items