Back to results
  • Lazer Z E Series 52" (LRE730GKA524A3)
  • Lazer Z E Series 52" (LRE730GKA524A3)
In Stock
Price: $11,199 USD
Deposit: $ 500
Hold With Deposit What is Hold With Deposit?

Lazer Z E Series 52" (LRE730GKA524A3)

1 Available
Overview

Discover the Exmark Lazer Z E-Series Mower

As the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. The 52" UltraCut Series 4 cutting deck, equipped with a newly redesigned discharge chute that distributes clippings over a wider area. Powered by a 24hp (726cc) twin-cylinder Kawasaki engine, equipped with a heavy-duty external air filter. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.

Like our entire lineup of zero-turn mowers, the Lazer Z E-Series delivers unmatched durability and long-term value.

decks
Blades
3 Blades at 20.50" Length
Deck_Style
Floating Deck
Blade_Tip_Speed
Approximately 18,500 fpm.
Cutting_Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck_Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Width_/_Cutting_Deck
52"
Deck_Style_Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
features

Lazer Z E Series 52" (LRE730GKA524A3) Less Time At The Pump

Gas-powered S-Series models have a single 12-gallon tank with one fill location.

Built to Last Lazer Z E Series 52" (LRE730GKA524A3)

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

Lazer Z E Series 52" (LRE730GKA524A3) On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Lazer Z E Series 52" (LRE730GKA524A3) Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Lazer Z E Series 52" (LRE730GKA524A3) Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Tool-less Belt Removal Lazer Z E Series 52" (LRE730GKA524A3)

Deck and hydro belt can be installed without using any tools.
equipment
UPC
193308225470
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
12-volt battery with 20-amp alternator.
Drive_Tires
23 x 9.5-12, 4 ply Turf Master®
Caster_Forks
.50" thick caster yoke arms.
Parking_Brake
Lever-actuated disc brake.
Tractor_Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade_Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Steering_Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard_Features
Engine hour meter and cup holder
Front_Caster_Tires
13 x 5.0-6, smooth-tread, semi-pneumatic.
Onboard_Intelligence
Smart Controller
dimensions
Width
64.8 in. (164.6 cm)
Height
70.5 in. (179.1 cm)
Length
79.2 in. (201.2 cm)
Curb_Weight
1136
Extra Fields
ProductSerialNumber
418858889
extra fields
ProductSerialNumber
418858889
power components
ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
Deck_Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel_Type
Gas Carbureted
Air_Filter
Heavy-duty canister air filtration system
Engine_Spec
3064
Engine_Brand
Kohler
Engine_Model
ECV749
Engine_Speed
3,750 RPM
Engine_Series
Command™ EFI
Fuel_Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Carb_Compliant
Fuel_Indicator
Yes - electronic Sender
PTO_Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
Safety_Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive_Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Drive_Wheel_Release
Allows unit movement without engine running.
Engine_Displacement
747
in stock locations
Big_Lake
1
Contact Information

 Contact Information

M&M Express Sales & Service

580 Humboldt Drive
Big Lake   Minnesota , 55309

(763) 263-6000

Location