Phone(s): (763) 263-6000

580 Humboldt Drive
Big Lake Minnesota
55309

Exmark Lazer Z E-Series LZE801GKA724A1 - N/A in California

Specifications

Model	Lazer Z E-Series LZE801GKA724A1 - N/A in California	Year	2022	Sale Type	New
Manufacturer	Exmark	Quantity	0	Manufacturer Qty	0
Price	Contact for price CAD

Description

The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort.

Mower Deck Widths: 48" , 52" , 60" and 72"

FEATURES

Hydro Drive, Simplified

Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Unibody Frame

Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”

Less Time At The Pump

Gas-powered E-Series models have a single 8-gallon tank with one fill location.

On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

EQUIPMENT

UPC

193308000534

Seat

Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position.

Electrical

12-volt battery with 15-amp alternator.

Drive_Tires

24 x 12-12, 4 ply Super Turf®

Parking_Brake

Lever-actuated disc brake.

Tractor_Frame

Unibody, welded, heavy-duty 1.5" x 3" tubular steel.

Blade_Spindles

No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.

Steering_Control

Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Standard_Features

Engine hour meter and cup holder

Front_Caster_Tires

13 x 5.0-6, smooth-tread, semi-pneumatic.

POWER COMPONENTS

ROPS

2-post foldable ROPS standard with seat belt and latch.

Drive

Hydro-Drive

Speed

Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.

Casters

.50" thick caster yoke arms.

Deck_Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.

Fuel_Type

Gas Carbureted

Air_Filter

Heavy-duty canister air filtration system

Engine_Brand

Kawasaki

Engine_Model

CV742

Engine_Speed

3,750 RPM

Engine_Series

V-Twin

Fuel_Capacity

8-gallon (30.3-L) single fuel tank with single fill location.

Carb_Compliant

Fuel_Indicator

Yes - electronic Sender

PTO_Engagement

MagStop electromagnetic 200-ft-lb clutch with spot brake

Safety_Package

Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.

Drive_Description

Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.

Drive_Wheel_Release

Allows unit movement without engine running.

Engine_Displacement

852

DECKS

Blades

3 Blades at 24.50" Length

Deck_Style

Floating Deck

Blade_Tip_Speed

Approximately 18,500 fpm.

Cutting_Heights

1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Deck_Construction

10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.

Width_/_Cutting_Deck

72"

Deck_Style_Description

Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.

DIMENSIONS

Width

84.9 in. (215.6 cm)

Height

70.5 in. (179.1 cm)

Length

86.1 in. (218.7 cm)

Curb_Weight

1244