Exmark Lazer Z X-Series LZX980EKC726W0 - N/A in California

Listing image Listing image Listing image Listing image
Specifications

Model Lazer Z X-Series LZX980EKC726W0 - N/A in California Year 2022 Sale Type New
Manufacturer Exmark Quantity 0 Manufacturer Qty 0
Price Contact for price CAD  
Description

With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Mower Deck Widths:  60" , 72" and 96"

FEATURES

UltraCut Series 6 Deck

This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)

Oil Guard System

The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.

Patented RED Technology

Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

A New Level of Comfort

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

Productivity

Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

EQUIPMENT
UPC
193308000756
Seat
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
12-volt battery with 25-amp alternator.
Drive_Tires
24 x 12.0-12, 4-ply Turf Master®
Parking_Brake
Lever-actuated disc brake.
Tractor_Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade_Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Steering_Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard_Features
Engine hour meter and cup holder
Front_Caster_Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
POWER COMPONENTS
ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Casters
.50" thick caster yoke arms.
Deck_Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel_Type
Gas EFI
Air_Filter
Heavy-duty canister air filtration system
Engine_Brand
Kohler
Engine_Model
ECV980
Engine_Speed
3,650 RPM
Engine_Series
Command Pro™ EFI
Fuel_Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Carb_Compliant
Fuel_Indicator
Yes - electronic Sender
PTO_Engagement
MagStop Electromagnetic 250-ft-lb clutch with spot brake
Safety_Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive_Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive_Wheel_Release
Allows unit movement without engine running.
Engine_Displacement
999
DECKS
Blades
3 Blades at 24.50" Length
Deck_Style
Floating Deck
Blade_Tip_Speed
Approximately 18,500 fpm.
Cutting_Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck_Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Width_/_Cutting_Deck
72"
Deck_Style_Description
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
DIMENSIONS
Width
84.9 in. (215.6 cm)
Height
70.5 in. (179.1 cm)
Length
86.1 in. (218.7 cm)
Curb_Weight
1300