ID # 19943066

Exmark Radius X-Series

Call for Price

Armed with a powerful Kawasaki FX921V commercial engine and a 60-inch UltraCut Series 4 cutting deck, the new Radius X-Series zero-turn mower leads the pack when it comes to productivity, cut quality and value. The Hydro-Gear integrated transmission and aggressive Kenda drive tires deliver maximum control, with ground speeds of up to 10mph forward. An adjustable full-suspension operator seat takes operator comfort to a whole new level, making Radius X-Series a zero-turn mower you'll look forward to using every time.

Mower Deck Widths: 60"

Radius X-Series
Sale Type

Exmark Radius X Series UltraCut Deck Technology

Exmark’s exclusive UltraCut decks are featured on Radius models. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.

Exmark Radius X Series Heavy Duty Unibody Frame

Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.

Exmark Radius X Series Quick Adjustable Rollover Protection System (ROPS)

Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.

Fuel Gauge Window Exmark Radius X Series

Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.

Exmark Radius X Series Height of Cut Made Easy

The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.

Comfort Stepped Up Exmark Radius X Series

X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.

Service Made Easy Exmark Radius X Series

A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.

power components
2-post foldable ROPS standard with seat belt and latch.
Infinitely variable speed selection from 0–10.0 mph (16.1 kmph) forward, 0–6.0 mph (9.7kmph) reverse.
.375" thick caster yoke arms
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel Type
Gas Carbureted
Air Filter
Heavy-duty canister air filtration system
Engine Spec
Engine Brand
Engine Model
Engine Speed
3750 rpm
Engine Series
Fuel Capacity
7-gallon (26.5-L) single fuel tank with single fill location.
Carb Compliant
Fuel Indicator
Translucent Visual
PTO Engagement
MagStop electromagnetic 225-ft-lb clutch
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive Description
Dual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
Drive Wheel Release
Allows unit movement without engine running.
Engine Displacement
Deluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
12-volt battery with 15-amp alternator.
Drive Tires
24 x 12-12 K3012 (142-7676)
Parking Brake
Lever-actuated pawl brake.
Tractor Frame
Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Steering Control
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
Standard Features
Engine hour meter, cup holder, tow hitch and jack receiver
Front Caster Tires
13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
3 Blades at 20.50" Length
Deck Style
Floating Deck
Blade Tip Speed
Approximately 18,500 fpm.
Cutting Heights
1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Deck Construction
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
73 in (185 cm)
70 in (178 cm)
82 in (208 cm)
Curb Weight


My Cart - items