ID # 19943077

Exmark Lazer Z X-Series LZX801CKA606C1

Videos
Call for Price
Overview

With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Mower Deck Widths:  60" , 72" and 96"

Specifications
Model
Lazer Z X-Series LZX801CKA606C1
Year
2022
Sale Type
New
Manufacturer
Exmark
features

Exmark Lazer Z X Series LZX801CKA606C1 UltraCut Series 6 Deck

This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service. (96" Flex Wing Deck is a rear discharge deck.)

Exmark Lazer Z X Series LZX801CKA606C1 Oil Guard System

The Vanguard Oil Guard System increases mower uptime and decreases necessary in-season maintenance by extending oil change intervals to 500 hours, while also lowering engine oil temperature by 20-30 degrees. Available on select Lazer Z X-Series models.

Exmark Lazer Z X Series LZX801CKA606C1 Patented RED Technology

Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.

Exmark Lazer Z X Series LZX801CKA606C1 A New Level of Comfort

Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.

Exmark Lazer Z X Series LZX801CKA606C1 Productivity

Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.

Exmark Lazer Z X Series LZX801CKA606C1 Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

equipment
UPC
193308000671
Seat
Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
Electrical
12-volt battery with 15-amp alternator.
Drive Tires
24 x 12.0-12, 4-ply Turf Master®
Parking Brake
Lever-actuated disc brake.
Tractor Frame
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver.
Steering Control
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Standard Features
Engine hour meter and cup holder
Front Caster Tires
13 x 6.5-6 smooth tread, semi-pneumatic tires.
power components
ROPS
2-post foldable ROPS standard with seat belt and latch.
Drive
Hydro-Drive
Speed
Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
Casters
.50" thick caster yoke arms.
Deck Lift
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Fuel Type
Gas Carbureted
Air Filter
Heavy-duty canister air filtration system
Engine Brand
Kawasaki
Engine Model
FX801V
Engine Speed
3,750 RPM
Engine Series
V-Twin
Fuel Capacity
12-gallon (45.4-L), single fuel tank with single fill location.
Carb Compliant
Fuel Indicator
Yes - electronic Sender
PTO Engagement
MagStop electromagnetic 200-ft-lb clutch with spot brake
Safety Package
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Drive Description
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
Drive Wheel Release
Allows unit movement without engine running.
Engine Displacement
852
decks
Blades
3 Blades at 20.50" Length
Deck Style
Floating Deck
Blade Tip Speed
Approximately 18,500 fpm.
Cutting Heights
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Deck Construction
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Width / Cutting Deck
60"
Deck Style Description
Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch.
dimensions
Width
72.8 in. (184.9 cm)
Height
70.5 in. (179.1 cm)
Length
83.1 in. (211.1 cm)
Curb Weight
1302
Videos

Videos

My Cart - items