Back
ID # 19943100

Fisher XV2™ V-Plow

  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
  • Fisher XV2™ V Plow
Videos
Call for Price
 Get a Quote  Get Financed  Value a Trade  Book a Demo   Get Directions  Print
Overview
Tougher Than Winter

When winter gets tough, get even tougher with the FISHER® XV2™ v-plow. Built to power through any storm, the FISHER XV2 v-plow comes equipped with extreme flared wings—up to 45"—and double-acting cylinders to easily handle anything thrown in its path. Plus, it’s qualified for vehicles up to Class 6, so it’s as versatile as it is hardworking.
Specifications
Model
XV2™ V-Plow
Year
2021
Sale Type
New
Manufacturer
Fisher
unique features
Fisher XV2™ V Plow Plow Blade Construction

The XV2 v-plow features extreme flared wings that soar from a 35" center height up to 45" at the outer edge on 10' 6" models. The XV2 v-plow is available in premium, corrosion-resistant stainless steel and powder coated steel in 8' 6", 9' 6" and 10' 6" widths.

The blade comes standard with a 6", high carbon steel cutting edge, providing increased wear resistance and a clean scrape.

An aggressive, 70-degree attack angle enhances scraping and back dragging, making it ideal for asphalt and paved surfaces, and for scraping up ice and hard-packed snow.
Fisher XV2™ V Plow Structural Reinforcement

The XV2 v-plow features our exclusive x-bracing design which is constructed from four vertical ribs and eight x-bracing ribs. Both the ribs and the boxed steel tube reinforce the blade for structural integrity and exceptional torsional strength.

A 1 ¼"-diameter, heat-treated steel center pin resides within a three-connection-point hinge for added strength and rigidity.

*9' 6" model shown
Trip Protection
 
Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.

The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

Fisher XV2™ V Plow Double-Acting Cylinders

InstaLock double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

Fisher XV2™ V Plow Center Snow Control

For exceptional snow containment in all positions, the XV2™ v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.
Fisher XV2™ V Plow 10' 6" Heavy-Duty Features

The 10' 6" XV2 v-plow model comes standard with specific heavy-duty features.

Blade Construction

Thicker moldboards and a more robust base angle with additional hinge points.

Heavy-Duty T-Frame

Features solid, one-piece construction from front to back and an oscillating pivot bar.

Standard Blade Angle Stops

Made of reinforced 3/16" high-strength steel tube, the blade stops reduce stress and wear on the blade.

Standard Curb Guards

Constructed of abrasion-resistant material and designed to fit tight to the blade, the curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.
universal features

Fisher XV2™ V Plow INTENSIFIRE™ Snow Plow Headlights

Available in both LED and Dual-Halogen models, INTENSIFIRE™ plow lights are engineered and tested for maximum light output, performance and durability to keep you ahead of the next storm.

Fisher XV2™ V Plow Minute Mount® 2 Snow Plow Mounting System

The reliable, mechanical attachment design of the Minute Mount® 2 snow plow mounting system allows for easy hook-up with no tools required and no electrical switches to fail and leave you struggling out in the cold. The vehicle mounts and lower gear are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier.

Fisher XV2™ V Plow Chain Lift Design

The FISHER® chain lift design offers a  wide range of performance and reliability advantages over a direct lift system.

  • Clean Scraping: The chain lift design allows the blade to continuously “float” while plowing, enabling it to freely follow the contours of the plowing surface for a cleaner scrape.
  • Higher Stacking: With a chain lift you can stack snow higher because the plow's movement is not restricted by the length of the ram stroke like on cylinder lift systems.
  • Reliability: With the simple mechanical chain lift design, there are fewer hydraulic and electrical components to worry about, so you can count on long life dependability.
  • Easy Recovery: In the rare event of a hydraulic failure, you can push the snow plow up into a snowbank and “short chain” it to the specially designed bracket for safe transport back to the shop.

Fisher XV2™ V Plow FLEET FLEX Electrical System

With the FISHER FLEET FLEX Electrical System, you have true fleet interchangeability. Unlike other manufacturers who require a different control system for different plows, the FISHER FLEET FLEX system lets you operate any FISHER Minute Mount 2 plow on any truck with the same Fish-Stik hand-held or joystick control.

Fisher XV2™ V Plow SECURITY GUARD™ Anti-Theft System

The exclusive SECURITY GUARD™ anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck. Unlike physical locks that can easily be cut or removed, the system provides a deterrent against theft by allowing you to electronically lock the snow plow's hydraulic functions, rendering your plow inoperable to unauthorized users.

Fisher XV2™ V Plow STORM GUARD™ Baked-On Powder Coat

The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows. Each FISHER plow goes through an automated, eight-wheel shot blaster pre-treatment process to remove mill scale and profile steel surfaces for the best adhesion, followed by a multi-stage pre-wash which provides superior surface preparation.

Then a durable epoxy primer is applied to improve corrosion resistance and enhance powder coat adhesion. The powder coat is then applied with robotic guns in a climate-controlled powder coat booth that ensures precise, uniform powder coat coverage. The final baking process seals the long-lasting, high-gloss, FISHER yellow coat, to provide superior protection for your snow plow, season after season.

Fisher XV2™ V Plow Plow Control Options

Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control (not shown) based on your preference.

Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode. Both controls have a plug-in connector for easy removal.

Fisher XV2™ V Plow Isolation Module

An underhood module transfers lights from vehicle to plow automatically and improves system reliability by using plug 'n play, sealed electrical connections that comply with OEM requirements. Isolating the plow's eletrical system from the vehicle's prevents the potential of electrical system damage in the event of a shorted circuit.

Fisher XV2™ V Plow Pre-Punched Blades for Accessories

The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.
specifications
Videos

Videos

Documents
My Cart - items
Request Quote   Checkout  
Total:
*Shipping & taxes calculated at checkout