ID # 33899572

Fisher TRAILBLAZER™ HEAVY-DUTY STRAIGHT BLADE

Videos

Call for Price

Get a Quote Get Financed Value a Trade Contact Us Book a Demo Get Directions Get Directions Print

PUSH BOUNDARIES.
SNOW REMOVAL REDEFINED.
Get more use out of your UTV or sub-compact tractor with the FISHER® TRAILBLAZER™ heavy-duty straight blade plow or v-plow. These plows are engineered to fit a wide variety of compact vehicles and to handle the same demands as our full-sized commercial plows. Constructed from high-strength, low-alloy steel components, both models feature an easy-on/easy-off mounting system and removable receiver brackets for exceptional ground clearance. TRAILBLAZER HD plows also feature Scrape Lock for clean scraping and back dragging.

Specifications

Model

TRAILBLAZER™ HEAVY-DUTY STRAIGHT BLADE

Category Name

Snowplows

Year

2024

Sale Type

New

Manufacturer

Fisher

BLADE TYPE

Straight Blade

MOUNT TYPE

UTV Mounting System or Tractor Mount Kit

BLADE GAUGE

14 ga

BLADE WIDTH

ANGLING RAMS

1" x 7"

BLADE HEIGHT

23.5"

CUTTING EDGE

¼" x 5" (Standard)

TRIP SPRINGS

PLOWING WIDTH

5'4" Full Angle

VERTICAL RIBS

MOLDBOARD OPTIONS

High Strength or Powder-Coated Steel

VEHICLE COMPATIBILITY

Full Sized UTVs & Tractors

APPROX. WEIGHT* (WITHOUT MOUNT)

261 lb

unique features

Fisher TRAILBLAZER™ HEAVY DUTY STRAIGHT BLADE

RELIABLE HYDRAULICS
We design and manufacture our own hydraulics to ensure the highest standards of performance, quality, and durability—giving you a plow that is fast, responsive, and built to last. This allows plow drivers to change the blade position quickly and easily for efficient plowing.

All critical hydraulic components are fully enclosed for protection from the elements.

GROUND CLEARANCE
Receiver brackets can be easily removed, restoring your vehicle back to its original ground clearance when the plow is not in use.

SCRAPE LOCK
The FISHER® Scrape Lock system locks the plow in any position you put it in to give you a cleaner scrape, especially while back dragging. With the plow locked in place, Scrape Lock gives you the performance of a larger plow without the extra weight and without the need to push any extra buttons.

UTV MOUNTING SYSTEM
Hooking up the TRAILBLAZER™ v-plow or straight blade is simple. With the receiver brackets installed on your utility vehicle, either drive in or manually push the plow into the receivers. Push up on the headgear to engage the hitch pins in the receiver holes, then slide the handle to lock the hitch pins in place. Finally, connect the electrical plug.

Detaching the plow is just as easy. The receivers are removable, to maintain ground clearance.

TRACTOR COMPATIBLE MOUNT KIT
Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the TRAILBLAZER heavy-duty straight blade and v-plow to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.

BLADE CONSTRUCTION – STRAIGHT
The 6′ wide, 14-gauge powder coated steel moldboard and standard 5″ high-carbon steel cutting edge make the TRAILBLAZER™ straight blade a strong choice that is the right size for your UTV.

STRUCTURAL REINFORCEMENT – STRAIGHT
With four vertical ribs and high-strength, low-weight, alloy steel construction, the TRAILBLAZER™ UTV straight blade is strong enough for commercial operation and light enough to fit most UTVs.

TRIP PROTECTION – STRAIGHT
Two heavy-duty coil springs protect your plow and UTV by allowing the whole blade to trip when striking obstacles.

Fisher TRAILBLAZER™ HEAVY DUTY STRAIGHT BLADE BLADE CONSTRUCTION – V-PLOW
Featuring a 6′ wide powder coated steel flared moldboard, the TRAILBLAZER™ UTV v-plow blades go from a 25 ¾” center height to a full 29 ¼” at the outer edge.

A high-carbon steel cutting edge also comes standard, increasing wear resistance.

STRUCTURAL REINFORCEMENT – V-PLOW
The high-strength, low-weight alloy steel components are both stronger and lighter than traditional steel, so your utility vehicle can work hard without having to carry the extra weight on your UTV frame like with heavier plows. The TRAILBLAZER™ v-plow blade is reinforced with six vertical ribs, and features the strength of our proven T-frame design.

Fisher TRAILBLAZER™ HEAVY DUTY STRAIGHT BLADE TRIP PROTECTION – V-PLOW
Each v-plow blade features independent trip-edge protection to get over bumps and hidden obstacles, whether in V, scoop or straight blade configuration, helping to protect the plow, the UTV and the operator. Since only the bottom edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.

The FISHER® trip edge uses compression-type springs that never require adjustment and will not wear out like extension springs.

DOUBLE-ACTING CYLINDERS – V-PLOW
Double-acting cylinders allow the operator to lock the wings together to use the v-plow in straight blade mode with single button control. Double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

CENTER SNOW CONTROL - V-PLOW
For exceptional snow containment in all positions, the TRAILBLAZER™ UTV v-plow has a center deflector designed to prevent snow from going over the top of the blade and the formed cutting edges reduce trailing snow.

WIDTH ADJUSTMENT – V-PLOW
When fully angled or in V mode, the TRAILBLAZER™ UTV v-plow plowing path is 5′ wide, and 4′ 7″ in scoop. For UTVs with a wider wheel base, a width-adjustment setting is available to make your plowing path wider in these positions. Using the alternate setting, the plowing width is 5′ 6″ when fully angled or in V, and 5′ 1″ in scoop.

standard plow features

Fisher TRAILBLAZER™ HEAVY DUTY STRAIGHT BLADE SECURITY GUARD™ ANTI-THEFT SYSTEM
The exclusive SECURITY GUARD anti-theft system is a safe and secure way to electronically lock your snow plow whenever it is detached from your truck.

STORM GUARD™ BAKED-ON POWDER COAT
The industry’s best protection against wear and rust, the STORM GUARD™ baked-on powder coat with epoxy primer is standard on all FISHER® snow plows.

TRAILBLAZER™ CONTROL OPTIONS
Choose between the ergonomic Fish-Stik® hand-held control or the dash-mounted joystick control based on your preference. Both feature automatic shutoff, backlit buttons for night operation, and LED lights which indicate "power" and "float" mode. Both controls have a plug-in connector for easy removal.

PRE-PUNCHED BLADES FOR ACCESSORIES
The blade is pre-punched for easy installation of accessories, providing a custom fit. The pre-punched holes also prevent damage to the powder coat that can sometimes occur when installing an accessory.

literature